CAN IS FULLY INTEGRATED INTO OUR PSDAQ SMART CONTROL SOFTWARE. IT IS SIMPLE TO USE AND EASY TO CONFIGURE INPUT/OUTPUT CHANNELS IN THE MAIN CAN SCREEN. THE DYNAPACK CAN ACCEPT UP TO 4 CAN DEVICES (#1-#4) WITH EACH DEVICE HAVING SEPARATE SETTINGS SO ONE DEVICE CAN FOR EXAMPLE CONNECT AT 500K-BITS/S WHILE THE OTHER DEVICE CONNECTS AT 125K-BITS/S.
Individual CAN outputs can be directly enabled or disabled from this screen
Features of the CAN interface:
- USB powered
- Galvanic isolation to over 500V with opto isolated USB to CAN communication
- Approximate Dimensions: 105 x 60 x 35mm, 230g
- Supports 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B Active)
- Supports all standard bit-rates. Custom bit-rates in the range of 10K to 1M supported
- Standard (CiA® 303-1) 9-pin D-Sub CAN interface connection
- Receive messages on the CAN bus, log and display real-time in PS DAQPLUS Software
- Transmit messages from the Dyno software to other devices on CAN, including Dyno’s measured torque
Minimum PC Specs
CPU: Intel i3 or higher
CPU Speed: 3.0GHz or higher
RAM: 4GB minimum
HD Space: 50GB Free
USB Ports: 1 x USB 2.0 onwards
Software: Windows7 upwards, 64 or 32-bit
Occasional Internet Connectivity required, i.e. WiFi or Network socket for loading of software
CANBUS Device (pictured) with Integrated Dynapack Software