Category

Plasma Cutting Scene

DMP Table Type Series

Menu

mommentum djaja - dama

Code pro006

  1. The portal of the DMP is made from an extremely strong and rigid structure, designed to meet the requirements of thin to medium thickness plasma applications.
  2. The water type cutting table is integrated with the machine or option fume suction cutting table.
  3. The option fume suction table there are 2 layers for table, upper for cutting area, lower one for sealed fume suction channel, easy to clean the cutting dross & pick up the parts & ensure the fume extraction performance in optimization.
  4. Burny Smart THC height sensor with AVC control & magnetic anti-collision device.
  5. Extra loading flame cutting torch is available, option with a flame cutting kit, up to 100mm for thicker carbon steel plate cutting.
  6. Recommended option for outer bag type filter system that can be either located by customer side or provided by DAMA
  7. Powerful & ease to use Windows-XPe PC based CNC
  8. LCD touch screen and full color high-resolution graphic display.
  9. 50 preprogram and choice of CAD/CAM to suit all applications.
  10. Multiple input for parts program loading, USB interface,RS-232 interface and Ethernet or wireless
  11. Both CAD's dxf and dwg files can be read directly for cutting.
Model DMP-1530 DMP-1560 DMP-1830 DMP-1860 DMP-2030 DMP-2060
Effective cutting width 1524 mm 1524mm 1800 mm 1800 mm 2000 mm
Effective cutting length 3100 mm 6100 mm 3100 mm 6100 mm 3100 mm 6100 mm
Machine space (W x L) mm 3000 x 4500 3000 x 8000 3300 x 4500 3300 x 8000 3500 x 4500 3500 x 8000
Longitudinal drive Dual AC Servo Motor/Rack / linear guide
Transverse drive AC Servo Motor/Rack / linear guide
Cutting Speed 100～6000 mm/min
Rapid speed 18000 mm/min
Plasma torch Height sensing control Smart THC
Plasma cutting capacity 1~50mm, Refer to plasma
Plasma gas Refer to plasma model
Power supply (CNC use) 3 phase, 220V, 60Hz, 5KVA
Power supply (plasma) Refer to plasma model
Water type table as standard
CNC controller : BURNY DAGGER CONTROL
  • Industrial Grade LCD 15" Touch Screen and Windows XPe-based operation system
  • With cycle start, Cycle stop, Go To, Reverse industrial grade membrane panel controls.
  • 1G SRAM, 80GB hard drive and USB interface.
  • 50 pre-programmed commonly used standard shapes. Accepts either ESSI or EIA RS274-D programming formats.
Option 1. Oxy-Fuel gas cutting kit
  • One gas torch with motorized torch lifter and station
  • Regulator & pressure gauge
  • Oxy-Fuel cutting logic sequence control & operation paneltorch
2. Zinc powder marking torch
3. Water table with air bag or fume suction table
Plasma Hypertherm
HPR-130XD (130A) HPR-260XD (260A ) HPR-400XD (400A) High performance plasma(manual gas)
HSD-130 Hyspeed plasma (130A),MAXPro200 plasma(200A)
Powermax 125,105,85 plasma (125A,105A,85A),)
DAIHEN OTC D12000 Air plasma(120A)