Category

Plasma Cutting Scene

Hypercut Gantry Type Series

Menu

mommentum djaja - dama - Hypercut Gantry Type Series

Code 003

  1. Gantry design for heavy duty: Ensuring, both precision and reliability.
  2. Two full sized saddles, running on longitudinal guide rails: Giving high precision and durability.
  3. Equipped with high performance AC servo drive system: Positioning and contouring speeds up to 18 M/min.
  4. Linear guide for transverse precision and durable.
  5. 300mm width transverse guide, stability and precision even with heavy torch suspension units.
  6. Transverse energy feed chains: Giving efficient transportation of hoses and cables.
  7. Hypertherm High-End CNC controller EdgePro, ArcGlide plasma height sensor and HPR Hyperformance Autogas plasma as standard.
  8. Phoenix software built-in cut charts for automatically setting process parameters.
  9. Built-in CutPro™Wizard easy use.
  10. 15" Glass touch screen and Windows XPe operation system.
  11. RAM≥1GB、SATA hard drive、two USB ports、two Ethernet ports and RS422、RS232 ports.
  12. Software utilities: Part Program Support (PPS), Remote Help, networking, Autogas support.
  13. DXF import, and simple shape nesting.
  14. Option ProNest software for plasma True Hole cutting.
Model HyperCut 2500 HyperCut 3100 HyperCut 4000 HyperCut 5000 HyperCut 6000 HyperCut 7000 HyperCut 8000 HyperCut 9000
Effective cutting width (A) 2500 mm 3100 mm 4000 mm 5000 mm 6000 mm 7000 mm 8000 mm 9000 mm
Rail span (B) 3500 mm 4100 mm 5000 mm 6000 mm 7000 mm 8000 mm 9000 mm 10000 mm
Effective cutting length 6500 mm +(X)
Rails length 9000 mm +(X)
Cutting speed 1～6000 mm/min
Rapid speed 18000 mm/min
Power supply 3 phases, 220V, 50~60Hz, 5KVA or on request
CNC controller
  • Industrial PC Based NC controller : BURNY 10 Plus SHAPE-CUTTING CONTROL
  • Industrial Grade LCD 15” Touch Screen and Windows XPe-based operation system
  • With Cycle Start、Cycle Stop、Go To、Reverse Industrial Grade Membrane panel controls
  • 1GB SRAM 、80 GB hard drive and USB and RS232/RS422 interface
  • 50 pre-programmed commonly used standard shapes
Option 1.Oxy-Fuel cutting kit:
  • One Oxy-Fuel torch with motorized torch lifter and station
  • Regulator & pressure gauge and manifold
  • Oxy-Fuel cutting logic sequence control & operation panel
2.Add Motorized Oxy-Fuel torch 3.Oxy-Fuel cutting torch height sensor (capacitive)
4.Zinc Powder marking torch 5.Warter spray
6.Electrical ignition unit 7.Rail's extension unit : Per 3000mm/unit (X)
8.Air Scribe 9.ProNest 2019 software for plasma True hole cutting.
10. Hypertherm HyPerformance Plasma : XPR-170,XPR-300,HPR-400XD,HPR-800XD