Duramax Hyamp Long torch sled
Cut skeletons faster and easier with the new Hypertherm torch sled for the Duramax® Hyamp™ Long torch. This new guide allows the torch to glide smoothly over the face of the skeleton and is also useful for scrapping.
Oil removal air filter kit
Protect your Powermax plasma system against oil in compressed air to maximize consumable life and system performance.
Plasma bevel cutting guides
The versatile and easy-to-use plasma bevel cutting guide is designed to cut a precise beveled edge for perfect weld preparation.
Hypertherm cartridge adapter
The cartridge adapter lets you convert to Hypertherm’s new cartridge consumable platform if you have a Powermax45® XP with a Duramax® Lock torch or a Powermax65®, Powermax85®, or Powermax105® with a Duramax torch.
Hypertherm cartridge reader
The Hypertherm cartridge reader provides a simple process for reviewing data stored in Hypertherm cartridges. Data analysis helps customers understand cartridge utilization and identify operator training opportunities.
Torch alignment guide for off-table beveling
To make the off-table bevel process better suited for plasma cutting, Hypertherm offers a torch alignment guide and V-bevel process charts for Powermax65®/85/105/125 or MAXPRO200® systems.
Powermax EtherCAT Interface for EDGE Connect
The Powermax® EtherCAT® Interface is an all-in-one adapter that allows a digital connection between the Powermax equipment and the EDGE® Connect CNC. This allows faster equipment setup, an intuitive operator interface, and access to real-time diagnostics information.
Torch teach tools
Hypertherm teach tools for SmartSYNC™, Duramax® and Duramax Hyamp™ robotic torches assist with programming robots before cutting. The torch teach tools enable system operators to program the robot’s cutting path, while visually verifying the torch will not touch the workpiece while cutting.
Hyamp torch adapter
The Hyamp™ torch adapter kit makes the 44 mm (1-3/4") machine torches (on the Powermax125® and MAXPRO200® systems) compatible with track burners, pipe cutters, cutting tables, and legacy equipment that accept a 35 mm (1-3/8") barrel torch.
Cartridge ohmic ring
The ohmic contact ring clips onto the mechanized cartridge, and connects it via electrical wire to torch height controls (THCs) that support the use of ohmic contact to find the surface of the workpiece before each cut.
Air filtration kits
Hypertherm air filtration kits protect Powermax systems against contaminated air and moisture from air lines.
Wheel/gantry mount kits
Hypertherm wheel and gantry kits for added mobility to move Powermax plasma cutting systems.
Leather torch sheaths
The Hypertherm leather torch sheath provides additional protection for torch leads against cuts, burn-through and abrasion.
Remote trigger pendants
The Hypertherm remote trigger pendant has a remote on/off control for a machine torch.
System dust covers
Hypertherm system dust covers are made from a flame-retardant vinyl designed to protect your Powermax plasma cutting system from dust and dirt.
CPC to CNC connecting cables
Hypertherm machine interface cables are connecting the CPC port to CNC controllers on Powermax45® XP, Powermax65®/85/105/125 and Powermax65/85/105 SYNC™ models.
Work cables
Hypertherm offers a variety of work cables with a choice of ring terminals, c-clips, hand clamps, and magnets to suit individual preferences.
Machine interface cables
Machine interface cables are for connecting the serial interface port to CNC controllers.
Automated communication kits
Upgrade kits for the Powermax65®/85 and Powermax65/85/105 SYNC™ systems for automated applications.
Hard carry case
Hypertherm hard carry case for protecting and storing the Powermax30 or 30 XP plasma cutting systems and accessories.
Gear bags
The Hypertherm gear bag carries spare torches, work cables, and accessories.
Shoulder strap
Hypertherm shoulder strap for Powermax30 XP, Powermax30 AIR, Powermax45, and Powermax45 XP plasma cutting systems.
Gouging heat shields
The Hypertherm gouging heat shield provides additional protection when gouging.
Plasma circle cutting guide
Plasma circle cutting guides cut circles up to 28″ in diameter.
Plasma angle cutting guides
Plasma angle cutting guide is designed for accurate hand cuts of angles and square edges.
Magnetic straight edge
Magnetic straight edge is designed for accurate hand cuts of straight edges.
Magnetic block 2-pack
This set of 2 magnetic blocks is designed for holding templates and straight edges for easy and accurate plasma hand cutting.
Pocket level and measuring tape holder
Hypertherm pocket-sized measuring tape holder with level.
Operator face shield helmets
Clear face shield with flip-up shades is designed for grinding metal and other metal cutting.
Hypertherm slotted hard hat
The Hypertherm slotted hard hat is compatible with dual face shields 017047 (shade 6) and 017048 (shade 8).
Dual face shield helmets for slotted hard hats
The dual face shield helmet has a clear face shield for grinding metal with flip-up lens for metal cutting with a plasma system.
Leather cutting gloves
The Hypertherm leather cutting gloves are insulated to protect hands during plasma cutting and welding.
Durafit cutting gloves
The Duramax cutting gloves are designed to offer maximum dexterity and fine-motor control.
Hyamp cutting and gouging gloves
Hyamp™ cutting and gouging gloves are insulated for heavy duty applications.
Safety eye shields
The Hypertherm safety shield provides additional protection when cutting.
Flip-up eye shades
The Hypertherm flip-up eye shades have shade 5 for plasma cutting up to 40 amps.
Adjustable eye shades
The Hypertherm adjustable eye shades are designed for use with < 40 amp plasma cutting systems.
Cutting goggles
The Hypertherm cutting have shade 5 for plasma cutting up to 40 amps.
Arc-rated metalworking jersey
The Hypertherm arc-rated metalworking jersey is top quality washable welder wear made from modacrylic fabric for flame and arc flash resistance.
Fiberglass cutting blanket
The fiberglass cutting blanket protects nearby surfaces from cutting and gouging sparks.