Description
Reduce operating costs and give your MAX200 plasma system a dramatic productivity boost with the quick-disconnect HyPro2000™ retrofit torch.
- 25% faster cutting speeds than standard MAX200
- 75% longer consumable life, compared to the standard MAX200 copper electrode
- Timesaving quick-disconnect torch design with easy alignment feature
Cut quality over life (200 A) – 12 mm (1/2″) mild steel, 15 m (50′) leads
200 A air with standard copper for HyPro2000
| Plasma gas (psi) Test Run Air Air | Shield gas (psi) Air | Material thickness (inches) | Arc voltge (volts) | Torch-to-work distance (inches) | Cutting speed ipm) | Initial pierce height (inches) Factor % | Pierce delay time (s) | ||
|---|---|---|---|---|---|---|---|---|---|
| 30 (65 SCFH) |
48 (65 SCFH) |
45 (220 SCFH) |
1/4 | 152 | 0.04 | 190 | 0.12 | 300 | 0.4 |
| 5/16 | 153 | 0.05 | 180 | 0.15 | 300 | 0.6 | |||
| 3/8 | 155 | 0.10 | 120 | 0.20 | 200 | 0.9 | |||
| 1/2 | 158 | 0.13 | 100 | 0.26 | 200 | 1.2 | |||
| 5/8 | 162 | 0.19 | 70 | 0.38 | 200 | 1.3 | |||
| 3/4 | 165 | 0.19 | 60 | 0.38 | 200 | 1.5 | |||
| 7/8 | 170 | 0.19 | 50 | 0.38 | 200 | 1.7 | |||
| 1 | 175 | 0.25 | 35 | 0.45 | 180 | 2.2 | |||
| 1-1/4 | 178 | 0.25 | 25 | Edge start | |||||
| 1-1/2 | 184 | 0.25 | 18 | ||||||
| 1-3/4 | 192 | 0.25 | 10 | ||||||
| 2 | 201 | 0.25 | 6 | ||||||
Visit our where to buy page to find a potential partner, or contact Hypertherm directly if you need further assistance.
HyPro2000 upgrade torch for MAX200
Last updated
11/14/2023
PDF
(663KB)
Torches and consumables
Air – Mild steel/Stainless steel/Aluminum
| Amperage | Shield | Shield cap | Nozzle | Swirl ring | Electrode | Water tube |
|---|---|---|---|---|---|---|
| 50 A | 220532 | 220936 220935 without tab |
220890 | 220529 | 220528 | 220521 |
| 130 A | 220536 | 220936 220935 without tab |
220892 | 220488 | 220487 | 220521 |
| 200 A | 420045 | 220936 220935 without tab |
420044 | 220488 | 220937 | 220521 |
O2 – Mild steel
| Amperage | Shield | Shield cap | Nozzle | Swirl ring | Electrode | Water tube |
|---|---|---|---|---|---|---|
| 130 A | 220536 | 220936 220935 without tab |
220892 | 220488 | 220487 | 220521 |
| 200 A | 420045 | 220936 220935 without tab |
420044 | 220488 | 220937 | 220521 |
N2 – Stainless steel/Aluminum
| Amperage | Shield | Shield cap | Nozzle | Swirl ring | Electrode | Water tube |
|---|---|---|---|---|---|---|
| 200 A | 420045 | 220936 220935 without tab |
420044 | 220529 | 220415 | 220521 |
| Lead length | Part number |
|---|---|
| 3 m (10′) | 028454 |
| 4.5 m (15′) | 028455 |
| 6 m (20′) | 028456 |
| 7.5 m (25′) | 028383 |
| 9 m (30′) | 028457 |
| 10 m (35′) | 028458 |
| 12 m (40′) | 028459 |
| 14 m (45′) | 028460 |
| 15 m (50′) | 028384 |
| 18 m (60′) | 028773 |
| 23 m (10′) | 028599 |
| 30 m (100′) | 028781 |
| Mounting sleeves | Length | Diameter | Part number |
|---|---|---|---|
| Standard | 279.4 mm (11″) | 50.8 mm (2″) | 220943 |
| Standard | 279.4 mm (11″) | 44.45 mm (1.75″) | 220942 |
| Description | Part number |
|---|---|
| Quick-disconnect receptacle | 220913 |
| HyPro2000 Quick-disconnect torch | 220921 |
| Torch upgrade kit – HyPro2000 for MAX200 Includes: machine torch (loaded with consumables), quick-disconnect receptacle, mounting sleeves (2″ and 1.75″), 200 A Air/O2 electrodes (2), 200 A Air/O2 nozzles (2), silicon lubricant for o-rings, consumable removal tool, plastic tube for hoses, plasma gas extension hose, operating manual. |
228908 |